无人机视角下的林木爆燃火特性研究

森林火灾“爆燃”现象的特征是突然发生的高强度、高蔓延速度的燃烧。目前为止，关于“爆燃火”的原因还没有达成共识。以无人机视角下对林木爆燃火特性研究，以四川木里特大森林火灾为研究对象，通过分析凉山州某森林扑火部队3月31日木里森林火灾当天KWT（科卫泰）无人机航拍火场画面，结合无人机实时影像及实地调研数据，分析了峡谷地形林火蔓延时空特征，探讨了峡谷中风向风速变化时空分布规律，研究了地形变化条件下，不同海拔高度风速特征，建立了无人机倾角测量风速模型（其中为风速m·s-1，为无人机倾角°）。结果表明，高山峻岭特殊地形环境下每天4:00—12:00时间段为静风期，为峡谷林火扑救最佳时期；午后15:00—17:00和晚上20:00—22:00为山谷地形风速活跃期；仿真软件数据显示山顶、谷底与山腰不同海拔位置的风速风向不统一，谷底会产生乱流现象，且风速与海拔不存在正相关关系，小气候在复杂地形中占主导影响地位；在谷口至山谷深处的中间位置会出现气流速度的波峰状态，并易形成乱流，为爆燃火发生提供了客观必要条件。该研究可为复杂地形环境下，森林草原火灾扑救安全提供数据和技术支撑。     

化学法改性煤沥青脱除苯并芘的研究

在管式反应器中采用苯甲酸、聚乙二醇、固体古马隆树脂（S）、液体古马隆树脂（L）为添加剂来降低煤沥青中有害物质苯并芘的含量，以期使得煤沥青可绿色化应用。采用紫外-可见分光光度计分析煤沥青中苯并芘含量。考察了反应温度、反应时间、添加剂添加量、催化剂等工艺条件对添加剂脱除煤沥青中苯并芘的影响。结果表明，不同工艺条件能降低煤沥青中苯并芘的含量。在优化条件下，不同添加剂对苯并芘脱除率由高到低依次为：液体古马隆树脂、聚乙二醇、苯甲酸和固体古马隆树脂。分析其反应机理，这与催化剂的酸性相关，发生亲电取代反应。结果表明，液体古马隆树脂（L）在催化剂存在下对煤沥青中苯并芘脱除率可达73.0%，显示了良好的应用前景。     

3D Organic–Inorganic Perovskite Ferroelastic Materials with Two Ferroelastic Phases: [Et3P(CH2)2F][Mn(dca)3] and [Et3P(CH2)2Cl][Mn(dca)3]

Organic–inorganic hybrid perovskite-type multiferroics have attracted considerable research interest owing to their fundamental scientific significance and promising technological applications in sensors and multiple-state memories. The recent achievements with divalent metal dicyanamide compounds revealed such malleable frameworks as a unique platform for developing novel functional materials. Herein, two 3D organic–inorganic hybrid perovskites [Et₃P(CH₂)₂F][Mn(dca)₃] ( 1 ) and [Et₃P(CH₂)₂Cl][Mn(dca)₃] ( 2 ) (dca=dicyanamide, N(CN)₂⁻) are presented. Accompanying the sequential phase transitions, they display a broad range of intriguing physical properties, including above room temperature ferroelastic behavior, switchable dielectricity, and low-temperature antiferromagnetic ordering (T_c=2.4 K for both 1 and 2 ). It is also worth noting that the spontaneous strain value of 1 is far beyond that of 2 in the first ferroelastic phase, as a result of the precise halogen substitution. From the point view of molecular design, this work should inspire further exploration of multifunctional molecular materials with desirable properties.     

Amphiphilic Graft Copolymers of Hydroxypropyl Cellulose Backbone with Nonpolar Polyisobutylene Branches

The novel amphiphilic graft copolymers with hydrophilic hard polar hydroxypropyl cellulose(HPC) backbone and hydrophobic soft nonpolar polyisobutylene(PIB) branches have been successfully synthesized through nucleophilic substitution reaction of living PIB chains carrying oxonium ions with the-OH groups along HPC backbone. The PIB branch length in the graft copolymers could be designed by living cationic polymerization and the grafting density could be adjusted by PIB~+/-OH molar ratio. The living PIB chains carrying oxonium ion were prepared by transformation of allyl bromide end groups in the presence of AgClO_4 and silver nanoparticles(3.2±0.3 nm, 0.7 wt%-1.8 wt%)generated in situ from AgBr. The phase-separation morphology was formed in the graft copolymers due to their incompatibility between backbone and branches. The hydrophilicity on the surface of graft copolymer films could be turned to hydrophobicity by increasing grafting density or/and length of PIB branches. The soft PIB segments in graft copolymers provided an unique surface via self-assembly for anti-protein adsorption against bovine serum albumin. A small amount of Ag nanoparticles in the copolymers contributed to good antibacterial activities against Staphylococcus aureus or Escherichia coli.     

Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

Two Ag(I)-Containing Supramolecular Coordination Polymers Constructed from the Multidentate N-donor Ligand 1-((1H-1,2,4-triazol-1-yl)methyl)-3,5-bis(3-pyridyl)-1,2,4-triazole Based on Hydrogen-Bonding and π–π Interactions: Syntheses,Crystal Structures,Optical Band Gaps and Luminescent Properties

Two Ag(I)-based coordination polymers, namely [Ag₂(3,3′-tmbpt)(o-Hbdc)₂]·H₂O (1) and [Ag₈(3,3′-tmbpt)₄(1,2,4-Hbtc)₄(H₂O)] (2) (3,3′-tmbpt?=?1-((1H-1,2,4-triazol-1-yl)methyl)-3,5-bis(3-pyridyl)-1,2,4-triazole, o-H₂bdc?=?1,2-benzenedicarboxylic acid and 1,2,4-H₃btc?=?1,2,4-benzenetricarboxylic acid), have been synthesized. Single-crystal X-ray diffraction analyses, elemental analyses, infrared spectra, powder X-ray diffraction analyses and thermogravimetric analyses have been carried out to characterize the structures of 1 and 2. Compound 1 shows a (3,4)-connected 2D layered structure with a Schläfli symbol of (4²·6)(4²·6³·8). The intermolecular O–H···O hydrogen-bonding interactions extend the 2D layer into a 3D supramolecular architecture. Compound 2 exhibits a (3,3)-connected double-layered structure with a Schläfli symbol of (4·8·10)₂(8²·10)₂. The intermolecular C–H···O hydrogen-bonding interactions link the double-layers to form a 3D supramolecular architecture. Moreover, there are intramolecular and intermolecular π–π interactions in 1 and 2, which stabilize the whole 3D supramolecular architectures. The band gaps of 1 and 2 are 3.19 and 3.09 eV, respectively, indicating the potential of 1 and 2 as semiconductive materials with wide band gaps. Moreover, 1 and 2 emit intense blue-green light, which may be potential photoactive materials.

Graphic Abstract

Two Ag(I)-based 3D supramolecular coordination polymers constructed from a multidentate N-donor ligand and two aromatic polycarboxylate anions via hydrogen-bonding and π–π interactions have been synthesized and characterized. The band gaps and photoluminescent properties of the compounds have been studied.

     

掺锗提高VO2薄膜的相变温度机理研究

二氧化钒(VO₂)作为一种长久以来备受关注的新型可逆相变材料,发展潜力巨大,其相变温度(T_MIT)的调控一直是研究热点。本文主要利用锗离子作为掺杂离子探索其对VO₂薄膜T_MIT的影响,并尝试解释其内部作用机理。在约1 cm²大小抛光的氧化铝薄片上沉积了一系列含不同比例锗离子VO₂薄膜。研究发现锗离子作为掺杂离子确实有利于T_MIT的提高(本课题T_MIT最大可达84.7 ℃)。T_MIT提高的主要原因是锗离子的引入能够强化单斜态V-V二聚体的稳定性,进而增强单斜态的稳定性,使得低温单斜态向四方金红石态转变更加困难。     

How do molecular interactions affect fluorescence behavior of AIEgens in solution and aggregate states?

Molecular interactions are crucial in diverse fields of protein folding,material science,nanotechnology,and life origins.Although mounting experimental research controls luminescent behavior by adjusting molecular interactions in light-emitting materials,it remains elusive to correlate microscopic molecular interactions with macroscopic luminescent behavior directly.Here,we synthesized three red luminogens with subtle structural variation and investigated the influence of molecular interactions on their luminescent behavior in solution and aggregate states.Our results indicate that strongπ-πand D-A interactions in both dilute solution(between luminogen and solvent molecules)and aggregate(between luminogens)states cause the redshift in emission,while weak interactions(e.g.,Van der Waals,C–H…π,and C–H…F interactions)enhance the quantum yield.This work provides a thoughtful investigation into the complicated influence of various molecular interactions on luminescent behavior.